THERMOMARK INK RIBBON | 25-WMSU
THERMOMARK INK RIBBON | 25-WMSU
Blog Article
The THERMOMARK 25-WMSU is a thermal transfer ink ribbon designed for industrial printing applications, including wire marking, ferrule printing, and heat shrink tube labeling. Below are the key details about this ribbon and its compatibility:
THERMOMARK 25-WMSU Ink Ribbon – Specifications
✔ Type: Wax-Resin Blend (balanced durability & print quality)
✔ Width: 25mm (standard for many industrial printers)
✔ Core Size: 1-inch (25.4mm) or 0.5-inch (12.7mm) (verify for your printer)
✔ Length: 300 meters (typical roll length)
✔ Compatible Printers:
Letatwin/Max models (e.g., LM 550A, if core size matches)
Phoenix Contact PT Series
Brady, Panduit, and other industrial thermal transfer printers
✔ Best For:
Wire/cable marking
Heat shrink tube printing
Ferrule labels (indoor/light industrial use)
Key Features
High-resolution printing (sharp text, barcodes, logos)
Smudge & abrasion-resistant (suitable for harsh environments)
Optimized for synthetic labels (polyester, vinyl, heat shrink)
Compatibility with Max LM 550A (Letatwin)
Check ribbon width (25mm) and core size (1-inch or 0.5-inch).
If the LM 550A uses 25mm-wide ribbons with a 1-inch core, this ribbon should work.
Verify in the printer manual or test a sample roll.
Where to Buy THERMOMARK 25-WMSU
Industrial Suppliers:
RS Components
Digi-Key / Mouser Electronics
Amazon Business / eBay Industrial
Direct from Manufacturers:
THERMOMARK official distributors
Phoenix Contact (if rebranded)
Alternative Ribbons if 25-WMSU is Unavailable
Brady BMP21-Compatible Ribbons (wax-resin, 25mm)
Phoenix Contact PT Ribbons (similar specs)
Avery Dennison Thermal Ribbons (check width/core match)
Troubleshooting & Tips
Faded Prints? → Adjust printhead pressure or replace ribbon.
Ribbon Wrinkling? → Ensure proper tension and alignment.
Not Sticking to Labels? → Verify label material compatibility (synthetic vs. paper).
Need Help?
If you’re unsure about compatibility, provide:
Your printer’s ribbon compartment dimensions (width/core).
The material you’re printing on (e.g., heat shrink, ferrules).https://store.unigulfsupply.com/product/thermomark-ribbon-25-wmsu-ink-ribbon/