INK RIBBON | LM550 COMPATIBLE

Ink Ribbon | LM550 Compatible

Ink Ribbon | LM550 Compatible

Blog Article

Ink Ribbon for Max LM 550A (Letatwin) – Compatible Thermal Transfer Ribbons


The Max LM 550A (Letatwin) printing machine uses thermal transfer ink ribbons to print on ferrules, heat shrink tubes, and cable markers. Below are the key details for compatible ribbons:






1. Compatible Ribbon Specifications


✔ Type: Wax-Resin or Full Resin (for durability)
✔ Width: Typically ~25mm–30mm (check machine specs)
✔ Core Size: 1-inch (25.4mm) or 0.5-inch (12.7mm) (verify for LM 550A)
✔ Length: ~300 meters (standard roll)



Recommended Ribbon Types:




  • Standard Wax-Resin – Good for indoor use (resistant to mild abrasion).




  • Full Resin – Extreme durability (resists chemicals, heat, oils).







2. Where to Buy LM 550A-Compatible Ribbons


OEM (Original Brand) Ribbons:




  • Letatwin/Max Original Ribbons (best compatibility, check part number).




  • Distributors: RS Components, Digi-Key, or authorized Letatwin dealers.




Third-Party Alternatives:




  • Universal thermal transfer ribbons (must match width & core size).




  • Brands like Avery, Brady, Zebra (check compatibility).




⚠ Caution: Some third-party ribbons may cause print quality issues or damage printheads if improperly matched.






3. How to Replace the Ribbon in Max LM 550A




  1. Power off the machine.




  2. Open the ribbon compartment (refer to the user manual).




  3. Remove the empty spool and insert the new ribbon roll.




  4. Thread the ribbon through the guide path (ensure proper tension).




  5. Close the compartment and perform a test print.







4. Troubleshooting Ribbon Issues


???? Faded Prints? → Check ribbon tension or replace with a fresh roll.
???? Ribbon Jams? → Ensure correct threading and no debris in the path.
???? Uneven Printing? → Verify ribbon alignment and printhead pressure.






5. Best Practices for Ribbon Use


✔ Store ribbons in a cool, dry place (avoid humidity).
✔ Use the correct type (wax-resin for general use, full resin for harsh environments).
✔ Clean the printhead regularly to prevent residue buildup.






Where to Find Exact Part Numbers?


Report this page